AXIS T94J01A WALL MOUNT GREY

ISR1100 4P DSL ANNEX B/J ROUTER W/ LTE ADV SMS/GPS EMEA & NA Accessories

ISR1100 4P DSL ANNEX B/J ROUTER W/ LTE ADV SMS/GPS EMEA & NA

ISR 1100 4P DSL ANNEX A ROUTER W/ LTE ADV SMS/GPS EMEA & NA Accessories

ISR 1100 4P DSL ANNEX A ROUTER W/ LTE ADV SMS/GPS EMEA & NA

Zebra EA3600-T1CP-00 barcode reader accessory Accessories

EA3600-T1CP-003600 Series Ethernet Adapter

DN-93617 Accessories

Digitus Extendible Shelf for 483 mm (19") Cabinets Accessories

- Extractable, with handle bar- For fixing at the four 483 mm (19") mounting profile railsThe extendible Shelves are easy to install at the four 483 mm (19") profile rails of your 483 mm (19") cabinets. Due to the sturdy, perforated sheet steel with a high load capacity, they are the optimal surface for your network components. An attached handle can be installed to faciliate the extension of the shelf. Available in standard color grey (RAL 7035) and black (RAL 9005).

Digitus Base for Varioflex-N, Unique & Dynamic Basic network enclosures - 800x1000 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Varioflex-N, Unique series and the Dynamic Basic series from DIGITUS. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Base for Varioflex-N, Unique & Dynamic network enclosures - 800x1000 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets of the Varioflex-N, Unique series and the Dynamic Basic series from DIGITUS®. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Server Rack Unique Series - 800x1000 mm (WxD) Accessories

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Special roof construction for fan unit, incl. perforated cover- Lock system with pivot lever on front- and rear door (incl. profile half cylinder lock)- Sliding cable entry with rubber sealing on the top and baseThe server cabinets from the Unique series were developed for especially convenient and flexible network cabling. Inlets to the side in the roof and floor equipped with brushes (starting with a cabinet width of 800 mm), a sliding inlet with foam rubber seal as well as an additional rear brush inlet in the floor structure, enable versatile use in a wide range of application scenarios. Single perforated front doors and double perforated back doors, including swing handle with profile half-cylinder, ensure improved air circulation. The roof is equipped with a perforated cover for improved air circulation. This features a special design for easy mounting of a fan module. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Side walls and doors that can be locked or removed in a modular design (horizontally separated starting from 42 rack units) improve accessibility. The door hinges can be switched. Furthermore, the cabinets can be completely dismantled if necessary due to their collapsible design.

Zebra 3PTY-GJ-XBKHS-ET4X8 tablet spare part/accessory Back cover Accessories

Digitus Cable support rail for 483 mm (19") network cabinets from the Unique & Dynamic series Accessories

- Enables effective cable routing at the side of the network enclosure- Easy attachment of cables to integrated hammerhead profiles using cable ties or Velcro tape- The rail can be mounted at several points on the frame of the DIGITUS® network enclosure- Ready for immediate use - delivery includes mounting materialThe cable support rails are installed horizontally in the enclosure depth of the 483 mm (19") network enclosure. As they are attached to the perforated frame profile, they provide plenty of scope for organized cable management. Individual cables or entire cable harnesses can be easily attached to the hammerhead profiles using cable ties or Velcro tape. The rails are suitable for all DIGITUS® network cabinets in the Unique and Dynamic series.