StarTech.com Caster Kit for Open Frame Rack - 4POSTRACK

Digitus Wall Mounting Cabinet Unique Series - double sectioned, pivoted Accessories

The DIGITUS® Professional Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany- Robust steel construction for sturdy wall mounting- Lockable safety-glass door with steel frame- Side panels are lockable and removableThe network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. Thanks to the integrated hinge in the back frame, the housing can be folded to the side if needed, for example in order to easily carry out assembly work in the back area of the cabinet. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. In addition, the back frame is equipped with brush management panels on the top and bottom. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. One pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. The back frame also has a 483 mm (19”) perforation. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall to open in either direction and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

Motorola AN480 RFID Antenna network antenna Directional antenna N-type 6 dBi Accessories

This single port antenna offers the maximum flexibility and performance required to meet the needs of enterprises around the world. Compatible in virtually any global market, Motorola's AN480 can be installed throughout the enterprise from the manufacturing and warehouse floors to the dock doors and outside in the yard.The AN480 antenna offers the environmental sealing required for indoor and outdoor use. Its extremely low axial ratio delivers a more uniform gain for superior performance.

Digitus SOHO Pro wall-mounted enclosure - 254 mm (10") - 315x300 mm (WxD) Accessories

The DIGITUS® wall-mounted enclosure SOHO Pro series is characterized by its efficient delivery in an optimized flat pack and particularly user-friendly installation.- Compact housing for installations where space is limited- Simplified logistics: delivered unassembled in an optimized flat pack- Quickly ready for use: Particularly user-friendly, quick installation with just a few screws- Flexible cable routing options thanks to protected openings in the roof and floor- Lockable safety glass door with 200° door opening angle- Depth-adjustable 254 mm (10") profile rails- Load capacity for the installation of components: 30 kgWhether in the home, office or in sub-distribution boards with limited space: With the compact 254 mm (10") solutions from the SOHO Pro series, you can install your network wherever you want. Available in three height units (6U, 9U, 12U), the wall-mounted enclosures are equipped with a full glass door and a cable entry in the roof and base. A pair of galvanized 254 mm (10") profile rails labelled with legible height units are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). The door hinges can be changed. The network enclosures are supplied unassembled in an optimized flat pack. Assembly takes place in just a few steps and is child's play thanks to the enclosed step-by-step instructions.

Digitus SOHO Pro wall-mounted enclosure - 254 mm (10") - 315x300 mm (WxD) Accessories

The DIGITUS® wall-mounted enclosure SOHO Pro series is characterized by its efficient delivery in an optimized flat pack and particularly user-friendly installation.- Compact housing for installations where space is limited- Simplified logistics: delivered unassembled in an optimized flat pack- Quickly ready for use: Particularly user-friendly, quick installation with just a few screws- Flexible cable routing options thanks to protected openings in the roof and floor- Lockable safety glass door with 200° door opening angle- Depth-adjustable 254 mm (10") profile rails- Load capacity for the installation of components: 30 kgWhether in the home, office or in sub-distribution boards with limited space: With the compact 254 mm (10") solutions from the SOHO Pro series, you can install your network wherever you want. Available in three height units (6U, 9U, 12U), the wall-mounted enclosures are equipped with a full glass door and a cable entry in the roof and base. A pair of galvanized 254 mm (10") profile rails labelled with legible height units are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). The door hinges can be changed. The network enclosures are supplied unassembled in an optimized flat pack. Assembly takes place in just a few steps and is child's play thanks to the enclosed step-by-step instructions.

Digitus SOHO Pro wall-mounted enclosure - 254 mm (10") - 315x300 mm (WxD) Accessories

The DIGITUS® wall-mounted enclosure SOHO Pro series is characterized by its efficient delivery in an optimized flat pack and particularly user-friendly installation.- Compact housing for installations where space is limited- Simplified logistics: delivered unassembled in an optimized flat pack- Quickly ready for use: Particularly user-friendly, quick installation with just a few screws- Flexible cable routing options thanks to protected openings in the roof and floor- Lockable safety glass door with 200° door opening angle- Depth-adjustable 254 mm (10") profile rails- Load capacity for the installation of components: 30 kgWhether in the home, office or in sub-distribution boards with limited space: With the compact 254 mm (10") solutions from the SOHO Pro series, you can install your network wherever you want. Available in three height units (6U, 9U, 12U), the wall-mounted enclosures are equipped with a full glass door and a cable entry in the roof and base. A pair of galvanized 254 mm (10") profile rails labelled with legible height units are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). The door hinges can be changed. The network enclosures are supplied unassembled in an optimized flat pack. Assembly takes place in just a few steps and is child's play thanks to the enclosed step-by-step instructions.

Digitus Wall Mounting Cabinet, SOHO, unmounted - 540x400 mm (WxD) Accessories

The DIGITUS® Wall Mounting Cabinets are made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany.- Unmounted flat package delivery for cost- and space effciency- Optimized air ventilation and exhaustion- Lockable glass door ensures safetyThe 483 mm (19”) network cabinets for wall installation from the SOHO series are delivered unassembled using a flat pack to optimize costs. Available in four rack units and equipped with a full glass door as well as a cable entry with brushes in the roof and floor, this is the perfect product for subdividing or building up a small to medium-sized network. Two pairs of galvanized 483 mm (19”) profile rails labeled with easy-to-read rack units are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). The door hinges can be switched. Installation takes just a few steps and is extremely easy thanks to the step-by-step instructions included.

GRANDSTREAM WALL-MOUNTING KIT FOR GRP2614/2615/2616 & GXV3350 Accessories

SNS-HD600G10K12NM6 Accessories

TELTONIKA WIRE IBUTTON - PROMO FINO AD ESAURIMENTO SCORTE Accessories

TELTONIKA WIRE IBUTTON - PROMO FINO AD ESAURIMENTO SCORTE

AXIS F4105-LRE Accessories

AXIS F4105-LRE