CAB-AC-C15-TW=

Zebra CBL-LGT00200-M1200 barcode reader accessory Extension cable Accessories

External Light Control Cable, 2M length- 5 pin M12 to 5 pin M12 connectors- Length is 2M (6.5 ft.)- Only compatible with FS40/VS40 and FS70/VS70 which include an external light port.- Max average current supported by FS/VS device is 1.0A.

Digitus Network cabinet Unique series - 800x800 mm (WxD) Accessories

The DIGITUS® Unique series has been manufactured, designed and developed for the high demands of IT infrastructure.- Roof is prepared to accommodate a fan unit and an attached, removable cover- Locking system with swivel lever handle on front door (prepared to accept profile half cylinder; adapter included)- Slide-on cable inlet with foam rubber seal in the baseThe network cabinets in the Unique series have been developed for particularly convenient and flexible network cabling. Brush-equipped inlets in the top and base (from 26U and 800 mm cabinet width), a slide-on inlet in the base chassis with foam rubber seal and rear brush strips above and below the rear door (from 26U) enable versatile use in a wide range of application scenarios. Vertical cable ducts with cover, installed next to the profile rails (from 800 mm enclosure width), round off the design. An offset, removable cover with ventilation slots ensures improved air circulation. This sits over a special construction for easy mounting of a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the enclosure. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Modular lockable and removable side panels and doors improve accessibility. Door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

AXIS T90B REMOTE CONTROL Accessories

AXIS T90B REMOTE CONTROL

Axis 5503-431 networking cable Accessories

Compatible with all Axis network video products. It can be used to connect two Ethernet cable with a male RJ-45 connector. Distance limitation: up to 100m.

Digitus Wall Mounting Cabinets Dynamic Basic Series - 600x450 mm (WxD) Accessories

- 450 mm depth provides a space saving installation- Optimized air ventilation and exhaustion- Lockable safety-glass door with steel frameThe network cabinets for wall installation from the Dynamic series were developed for easy and especially cost-optimized network expansion. The roof, floor and back wall of each cabinet are equipped with a pre-cut cable inlet. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable side walls as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The mounting plate provided is bolted on the wall and then connected with the housing.

StarTech.com DK31C3MNCRUE laptop dock/port replicator Wired USB 3.2 Gen 2 (3.1 Gen 2) Type-C Accessories

USB-C Docking Station | Triple/Dual 4K | 7x USB Hub | 60W USB Power Delivery | GbEConnect a USB Type-C/Thunderbolt™ 4 enabled Chromebook and a combination of DisplayPort and HDMI monitors to this USB-C Docking Station. This dock supports Chromebooks and Ultra HD 4K monitors. The 3.3ft (1m) USB-C Screw Lock to USB-C Cable ensures a secure connection to the dock and host device.Works With Chromebook (WWCB) certifiedThis USB-C Docking Station is tested and certified to meet Google's compatibility standards. The certification ensures seamless operation with Chromebook devices. This is the ideal dock to deploy in business and education environments. Automatic firmware updates are available through ChromeOS for maximum security, compatibility, and performance.Enhance Productivity with Triple-4K VideoConnect a combination of one USB-C DP Alt Mode, one HDMI, and/or up to two DisplayPort monitors to the Video 1 and Video 2 Ports and connect one HDMI monitor to the Video 3 Port for a triple-monitor setup at 4K 30Hz, and features up to 4K 60Hz. High-resolution video performance is vital for applications involving detailed graphics, enhancing workplace productivity by expanding the display capabilities of Chromebook devices.Works With Chromebook Docking Station FeaturesConnect the docking station to a Chromebook's USB Type-C/Thunderbolt™ 4 port to enable a variety of connectivity options and features.• 3x USB-A ports with support for USB 10Gbps - one 1.5A charging port• 2x USB-A ports with support for High-Speed 2.0 (480 Mbps) ports for USB-peripheral devices• 2x USB-C ports with support for USB 10Gbps and Type-C data and 1.5A charging port, Video 1 Port (DP Alt Mode)• 1x Gigabit Ethernet port• 1x 3.5mm Audio Jack 4-pole TRRS for a 3.5mm headset• 2x Kensington Security Lock Slots60W USB Power Delivery 3.0The USB-C Docking Station supports 60W USB Power Delivery, using the universal power adapter.This product is backed for 3-years by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.This product works with devices capable of running the latest version of ChromeOS and has been certified to meet Google's compatibility standards. Google is not responsible for the operation of this product or its compliance with safety requirements. Chromebook and the Works With Chromebook badge are trademarks of Google LLC. USB Type-C® and USB-C® are trademarks of USB Implementers Forum. Thunderbolt™ is trademark of Intel.The StarTech.com Advantage

AXIS TQ6905-E WASHER KIT Accessories

AXIS TQ6905-E WASHER KIT

StarTech.com 2U Horizontal Finger Duct Rack Cable Management Panel with Cover Accessories

Organize cables in your server rack or cabinet with a horizontal, covered cable ductThe CMDUCT2U2 2U Finger Duct Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize horizontal cabling, through a covered cable duct.The 2U cable organizer features a removable top cover that makes it easy to add or remove bundled cables quickly. The duct also offers a series of fingers on either side, as well as pass-through holes at the back to help you route your cables where you need them, and reduce cable strain in the process.Made of high-quality steel and plastic, the cable manager is a durable solution for your server room or wiring closet. For easy installation, this horizontal cable organizer comes complete with M6 screws.Backed by a StarTech.com 2-year warranty.The StarTech.com Advantage

Extreme networks KT-147407-02 network equipment spare part Installation kit Accessories

Zebra KT-BKLT-RS507-10R barcode reader accessory Accessories

Buckles for elastic straps, used with trigger configurations only. (10 pk)