Ubiquiti ISO-BEAM-620 network antenna accessory

Cisco 4G-AE010-R cellular signal booster Indoor cellular signal booster Grey Antennas

The Cisco 4G-AE015-R antenna base is a remote antenna solution for the Cisco 4G wireless WAN EHWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

Cisco 4G-LTE-ANTM-O-3 network antenna Omni-directional antenna SMA 2.5 dBi Antennas

Indoor or outdoor low-profile antenna with 4-foot dongle, black radome.4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome.

Cisco 4G-LTE-ANTM-O-3 network antenna Omni-directional antenna SMA 2.5 dBi Antennas

Indoor or outdoor low-profile antenna with 4-foot dongle, black radome.4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome.

Cisco 4G/3G Omnidirectional Dipole Antenna network antenna Omni-directional antenna TNC 2 dBi Antennas

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees. - Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.

Cisco 4G-LTE-ANTM-D network antenna Omni-directional antenna TNC 2 dBi Antennas

The 4G-LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services Routers Generation 2 (ISRs G2) and Enhanced High-Speed WAN Interface Cards (EHWICs).The 4G-LTE-ANTM-D antenna is marked with a green band and the product ID (PID) to indicate that it supports 4G Long Term Evolution (LTE) networks. It has the following hardware features: - Articulating Joint—It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees, 45 degrees, and 90 degrees. - Male threaded Neill-Concelman (TNC) Connector—It lets you directly mount the antenna to any Cisco 4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Figure 1). The threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.

Cisco 4G-AE010-R Indoor cellular signal booster Grey Antennas

The Cisco 4G-AE015-R antenna base is a remote antenna solution for the Cisco 4G wireless WAN EHWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

Cisco Meraki MA-ANT-3-B1 network antenna Omni-directional antenna RP-TNC 5.7 dBi Antennas

The Dipole antenna is ideal for low ceiling installations where wall penetration or extended reach are important. Some example use cases are low-density deployments like schools and hotels to provide basic connectivity. These types of best-effort deployments usually have APs installed on walls or uneven surfaces. This antenna is bendable.

Cisco Meraki MA-ANT-3-D6 network antenna Omni-directional antenna RP-TNC 3.7 dBi Antennas

The Downtilt Panel Omnidirectional antenna is ideal for medium ceiling (8 ft - 25 ft) aesthetic consensus installations. Some example uses are medium-density deployments like cube office space and vestibules. This antenna supports Meraki’s smart antenna capabilities. The price shown is for a 5-connector model; the Downtilt Panel Omni antenna can be purchased with 5 or 6 connectors.

Cisco ANT-WPAN-OD-OUT-N= network antenna Omni-directional antenna N-type 1.5 dBi Antennas

Cisco 8 dBi Direct Mount Omnidirectional Antenna for 5 GHz network antenna Antennas

Omnidirectional antenna for Cisco Aironet 1520 series mesh access points. Suitable for all deployments, including cable strand mount applications.