N844-01M-12-P - Cables & Adaptors by Eaton

Tripp Lite NM12-603-01M-BL M12 X-Code Cat6 1G UTP CMR-LP Ethernet Cable (Right-Angle M/M), IP68, PoE, Blue, 1 m (3.3 ft.) Cables & Adaptors

Cat6 M12 Cable Recommended for Industrial and Other EnvironmentsThis M12 X-Code cable connects Gigabit Ethernet networks in wet/humid environments, places subject to vibration and other areas where protection from harsh elements is essential, such as factories, warehouses, recycling plants, airports, railways and machine shops. The circular M12 connectors with 12-millimeter locking thread are especially designed for washdown and corrosive applications, including agriculture, alternative energy, communications, factory automation, measurement and control, robotics, transportation and food/beverage facilities.IP68 Rating Denotes Resistance to Dust and WaterThe IP68 rating means the M12 cable is not only 100% protected against dust, but also able to endure immersion in 1.5 meters of water for up to 60 minutes with no damage or decline in performance.Supports Power over Ethernet to Save You Money and Give You More Installation ChoicesBecause this Cat6 cable supports high-power 60W PoE, it can supply the power to operate compatible data, voice, security and audio/video PoE devices, such as surveillance cameras, VoIP telephones and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device, as well as installing separate power and data cables. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.CMR-LP Certified for Cable Installations with Increased Power LevelsUL's Limited Power (LP) certification indicates the NM12-603-01M-BL has been evaluated to handle the marked current under installation scenarios without exceeding the temperature rating of the cable. This CMR-LP-certified cable provides a simple way to prepare installations for increased power levels without having to worry about susceptible issues caused by excessive heat.Right-Angle Plug Makes Connecting in Tight Spaces EasierOne M12 connector is designed at a space-saving right angle, making it easy to install in confined spaces, such as a crowded equipment rack or a network device located flush against a wall. The right-angle construction also relieves strain on the cable and connector and prevents the cable from bending awkwardly.Colored Blue to Avoid Misidentification That Can Cause Costly DowntimeThis Cat6 UTP copper cable features a blue PVC jacket that allows easy, fast identification in field devices, controllers and switches and helps prevent the cable from becoming inadvertently disconnected.

Zebra CS-CAB-MNTG-C6-R2 mounting kit Black Cables & Adaptors

Tripp Lite N858B-15M-3X8MG 40/100/400G Multimode 50/125 OM4 Fiber Optic Cable (3x8F MTP/MPO-PC F/F), LSZH, Magenta, 15 m (49.2 ft.) Cables & Adaptors

40/100/400 GbE Cable Supports Higher Bandwidths Needed for High-Density Data NetworkingThe N858B-15M-3X8MG is a premium multimode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals over short distances. It is designed to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 100 Gb Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 10 Gb and 25 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb or 400 Gb.Magenta-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has a magenta jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas. The connectors’ slim boots and magenta housings allow easy one-handed installation and removal of the cable.

Tripp Lite N844-03M-8LC-PT MTP/MPO Fan-out Cable with Push/Pull Tab Connectors, MTP/MPO to 4xLC, 40GbE, 40GBASE-SR4,OM3 Plenum-rated - Aqua, 3M (9.84 ft.) Cables & Adaptors

MTP / MPO to 8 x LC Fan-out CablePush/Pull tab connectors offer maximum accessibility in high density installations; install / remove with one hand without needing additional toolsSlim uniboot design saves space and makes cables easier to managePremium-grade ceramic ferrule designed specifically for 10GbE and faster applicationsSturdy plastic housing for long-lasting durabilityOM3, 40GbE rated, 40GBASE-SR4Backward compatible with existing 50/125 fiberPlenum rated jacket

Tripp Lite N520-30M-P Duplex Multimode 50/125 Fiber Plenum Rated Patch Cable (LC/LC), 30M (100 ft.) Cables & Adaptors

This multimode duplex Fibre Channel optic LC/LC Ethernet cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a plenum-rated jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and provides built-in headroom for future applications. Plenum rated cable used where local fire code calls for fireproof cable. The cable provides higher bandwidth optimized for Gigabit and 10 Gbps networks as well. Also available in 1, 2, 3, 5, 10, 15, 20, 25 and 50 meter lengths. Enter "N520-" in the search field to bring up all lengths. For LC-SC cables, search "N516-", and for SC-SC, search "N506-".

Tripp Lite N516-20M Duplex Multimode 50/125 Fiber Patch Cable (LC/SC), 20M (65 ft.) Cables & Adaptors

Constructed with 50/125 micron cableLength - 20MUse on fiber and fibre channel installationsLC male to SC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: Two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Tripp Lite N518-05M Duplex Multimode 50/125 Fiber Patch Cable (LC/ST), 5M (16 ft.) Cables & Adaptors

Constructed with 50/125 micron cable Length - 5M Use on fiber and fibre channel installationsLC male to ST male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiber Built-in headroom for future applications

Tripp Lite N846B-20M-24-P 40/100/400G Multimode 50/125 OM3 Fiber Optic Cable (24F MTP/MPO-PC F/F), LSZH, Aqua, 20 m (65.6 ft.) Cables & Adaptors

40/100/400 GbE Cable Supports Higher Bandwidths for High-Density Data NetworkingThe N846B-20M-24-P is a premium multimode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals over short distances. It is designed to support higher bandwidths for high-density patching between data center MDFs and IDFs in enterprise installations. This multimode 50/125 OM3 cable is an ideal choice for 400 Gb Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 10 Gb, 25 Gb, 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.100% Tested for Low Insertion Loss and Attenuation LossThe cable is tested for low insertion loss on the factory-terminated 24-fiber MTP/MPO connectors and attenuation loss that meets or exceeds current standards. The connectors’ slim boots allow easy one-handed installation and removal of the cable.Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM3-rated cable has an aqua jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

Tripp Lite N506-05M Duplex Multimode 50/125 Fiber Patch Cable (SC/SC), 5M (16 ft.) Cables & Adaptors

Constructed with 50/125 micron cableLength - 5MUse on fiber and fibre channel installationsSC male to SC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumeric Aperture: .275 nominalProof Test Level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Tripp Lite Preloaded Fiber Panel, 1U - 6x (4x LC/LC Duplex M/M) 8F Trunk Cables, OS2 Singlemode, 10 m (32.8 ft.) Cables & Adaptors

1U Panel Solution Comes with Cabling Preloaded to Cut Costs and Save TimeAll necessary cabling is included with this preloaded fiber panel, coiled inside and ready for immediate use. The aluminum 1U chassis features six 8-fiber LC Duplex singlemode trunk cables, all 10 meters (32.8 feet) in length to make management easy. The panel opens to provide easy access to stored cables. Use only as much cabling as you need. The remainder stores inside the chassis to eliminate cable clutter, allow better airflow through the rack and make equipment maintenance and replacement easier. The cables and panels have labels to help with organization. You also avoid the expense and effort of custom cabling. The flexibility in cable length lets you reuse the cables if equipment is moved. The N48S-6L8L-10 mounts in just 1U of space in an EIA-standard 19-inch rack.