Axis 01793-001 networking cable Black 0.5 m Cat5e

Zebra SG-WT5X6-HPMNT-01 handheld mobile computer accessory Mount Accessories

Hip Mount, Allows Wearable Terminal To Be Worn On A Belt

Digitus L-Support Sliding Rails for 483 mm (19") Network Cabinets Accessories

- Easy installation- Variable in depth: 350 mm to 600 mmThe L-Support Slide Rails help you to support the installation of heavy duty components in DIGITUS® 483 mm (19”) network- or server cabinets. They are getting fixed on the four 483 mm (19”) profile rails. With galvanized steel sheet and a load capacity of up to 100 kg, they offer a perfect solution.

C1120-TOP-PLATE Accessories

ACS-1100-RM-19 Accessories

ACS-1100-RM2-19 Accessories

Digitus Base for network cabinets from the Unique & Dynamic Basic series - 600x600 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

KT-HSX100-OTH1-10 Accessories

Digitus Base for Unique Network & Dynamic Basic cabinets - 600x1000 mm (WxD) Accessories

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledThe plinths are available for all 483 mm (19") cabinets in the Unique series and the Dynamic Basic series from DIGITUS. Increases the ground clearance by 100 mm. Up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Supplied unassembled.

Digitus Network cabinet Dynamic Basic series - 800x1000 mm (WxD) Accessories

The DIGITUS® Dynamic Basic series has been manufactured, designed and developed to meet the high demands of IT infrastructure.- Installation of roof ventilators prepared- Lockable swivel lever handle on the front door- Base with punched cable inlet, covered with screwed plateThe Dynamic series network cabinets have been developed for simple and particularly cost-optimized network expansion. Sophisticated positioning of the cable inlets ensures effortless installation depending on the application. In the floor chassis, this is located centrally at the rear, protected by a screw-fastened cover plate. Enclosures from 800 mm width are additionally extended by cable inlets with plastic covers on the left and right. These are also integrated in the roof (1 x for 600 mm enclosure width, 3 x for 800 mm enclosure width). The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side and rear panels as well as the lockable and removable front door improve accessibility. The door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design.

Digitus Industrial Network Cabinet, Indoor, IP55 Accessories

- Safety class IP55 against dust & water ingress acc. to IEC EN60529- IK10 mechanical impact resistance acc. to IEC EN62262- 4 point locking system on front- & rear door- incl. already mounted plinthThe free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized, bolted panels. In addition, it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. A wraparound profile perforation supports a wide range of installation options in the cabinet. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). The adhesion capacity according to EN ISO 2409: Class 0 to 1 as well as the 500-hour test carried out for resistance against salt spray, demonstrates a permissible operating temperature from - 25 °C up to + 70 °C. The removable side walls, fastened with countersunk screws, as well as doors including swing handle with profile half-cylinder, improve the security of access.