Corsair CP-8920224 internal power cable

Corsair CP-8920248 internal power cable 0.65 m Cables & Adaptors

The CORSAIR Premium Individually Sleeved PCIe Type 4 Gen 4 cables combine premium paracord sleeving and a heatshrink-less finish with wide compatibility for CORSAIR Type 4 Power Supplies.UPGRADE YOUR WAYAdd only what you need with individual cable upgrades.SUPERIOR FLEXIBLE SLEEVED CABLESTriple-layer mesh paracord sleeved cables provide easy cable routing and stylish aesthetics. Available in seven different colors and patterns.MODULAR INTERLOCKING CABLE COMBSPre-installed 24-pin and 8-pin cable combs give your system a professional look in seconds.CONSISTENT, STEADY POWERIn-line capacitors on the ATX 24-pin, EPS12V and PCIe cables ensure clean voltage delivery and stable power.FULLY COMPATIBLEGuaranteed for use with all Type 4 CORSAIR PSUs. To see if your PSU is compatible, check out our PSU Cable Compatibility List.

StarTech.com Cat5e Patch Cable with Snagless RJ45 Connectors - 5 m, Blue Cables & Adaptors

Cat 5e CablesOur wide selection of Cat 5e patch cables makes it easy to find the lengths and colors that you need to complete your network connections.Our Ethernet cables are:- Durable. All of our patch cables are constructed to the highest industry standards, to ensure high-quality installs.- Dependable. You can rely on our Cat 5e cables to deliver the stability and speed that you need for reliable network performance.- Backed by a lifetime warranty. All of our network cables are guaranteed to last as long as you need them.

Cisco SFP-25G-AOC2M InfiniBand/fibre optic cable 2 m SFP28 Aqua colour Cables & Adaptors

Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.AOC cable require BASE-R FEC, or RS-FEC on the host ports.

Cisco SFP-H25G-CU1M InfiniBand/fibre optic cable 1 m SFP28 Black, Grey Cables & Adaptors

StarTech.com 10m (32.8ft) LC to LC (UPC) OS2 Single Mode Duplex Fiber Optic Cable, 9/125µm, 100G, Bend Insensitive, Low Insertion Loss - LSZH Fiber Jumper Cord Cables & Adaptors

Enhance the performance capabilities of CWDM applications over an OS2 fiber networkOS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to LC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.The StarTech.com Advantage

StarTech.com 2m (6.6ft) SC to SC (UPC) OS2 Single Mode Duplex Fiber Optic Cable, 9/125µm, 40G/100G Zipcord, Bend Insensitive, Low Insertion Loss - LSZH Fiber Jumper Cord Cables & Adaptors

Enhance the performance capabilities of CWDM applications over an OS2 fiber networkOS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished SC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive Fiber Core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.The StarTech.com Advantage

StarTech.com SATA Drive to mSATA Host Adapter for 2.5in / 3.5in SATA Drives Cables & Adaptors

Turn an mSATA host connection into a standard SATA portThe MSAT2SAT3 mSATA to SATA adapter enables you to connect a standard SATA drive to an available mSATA port.The adapter improves system capacity by enabling an mSATA port to host a larger SATA hard drive (tested up to 4TB). For guaranteed compatibility and performance the adapter is compliant with SATA I/II/III revisions, allowing for transfer speeds up to 6Gb per second.The MSAT2SAT3 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Poly SHS 2626-13 USB-PTT Secure Voice Monaural no Serial no PTT Momentary TAA Cables & Adaptors

Eaton EBMCBL48 power cable Black 2 m C14 coupler Cables & Adaptors

Eaton 9PX battery extension cable used with 9PXEBM48RT

StarTech.com 7.5m CAT6 Ethernet Cable - Green CAT 6 Gigabit Ethernet Wire -650MHz 100W PoE RJ45 UTP Network/Patch Cord Snagless w/Strain Relief Fluke Tested/Wiring is UL Certified/TIA Cables & Adaptors

7.5 m CAT6 Patch Cable | Snagless | 100% Copper Wire | Green | ETL VerifiedThis CAT6 cable meets all Category 6 cable specifications, to deliver a reliable Gigabit network connection. Protect Your Equipment This CAT6 patch cable is built using 100% copper wire and are tested to comply with ANSI/TIA 568 C.2 Category 6 requirements. We don’t use copper-clad aluminum (CCA) wire, which is subject to problems like weak power delivery, heat buildup, equipment damage and possibly fire.   The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.  High-Quality Construction  The CAT6 cable is manufactured using high-quality copper conductors and carefully constructed and tested to keep Near-End Crosstalk (NEXT) well within acceptable limits. The patch cable is constructed with 24 AWG copper wire, to ensure peak performance for demanding Ethernet applications such as Power-over-Ethernet and 4K or 1080p video streaming.  Easily Install Your Network Cables   For trouble-free cable runs, this durable cable feature snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break.   The CAT6 Ethernet cable also features molded boots which offer strain relief by stopping the RJ45 connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease network connectivity and performance.   N6PATC750CMGN is backed by a StarTech.com lifetime warranty for guaranteed reliability.  The StarTech.com Advantage- HIGH PERFORMANCE CAT6 ETHERNET CABLE: 100% copper for error-free Multi Gigabit 1/2.5/5Gbps connections; 10Gbps up to 50m; Fluke patch cord tested to comply w/ANSI/TIA-568-2.D Category 6 & ETL Verified- POE SUPPORT: 24 AWG stranded copper conductors & UL Rated Wiring (E132276-A) supports up to 100W for PoE devices like VOIP phone & security systems; IEEE 802.3bt & DTE power compliance reduces cable heating- QUALITY CONSTRUCTION: ETL & UL certified wire; 50-micron gold-plated connectors prevent rust/corrosion to avoid costly network downtime; High quality PVC jacket resists bending or fraying damage